[. . . ] Use the lever arm and the four roller bases only if they are in a faultless condition. Ensure that all doors and drawers that the piece of furniture might have are secured against unintentional opening before shunting it. [. . . ] Place one roller base » (C) under each raised corner of the furniture piece. To lower the furniture piece onto the roller base Hints: To avoid uneven lifting, always take into account the load centre of gravity and place the lever arm on the side to be lifted. at the hand grip · With this you will require the least effort. Push the swivelling head ´ of the lever arm under the furniture and in the middle of it (A). Repeat the above procedure for the opposite side of the furniture piece. -3- Hint: The roller bases are each fitted with a rotatable loading surface ¿. With these you can subsequently adjust the roller bases under the furniture piece. Adjust the roller bases » so that all of the wheels are facing in the same direction. Adjust the roller bases so that the wheels all face in the same direction. Pull/push the furniture piece to the desired location with the assistance of the roller bases . Place the four roller bases » under the extreme corners of the furniture piece. Thereby, the furniture piece should be positioned completely over the four roller bases ». [. . . ] Dispose of the appliance through an approved disposal centre or at your community waste facility. dispose of all packaging materials in an environmentally friendly manner. [. . . ]